Uphenyo lwePricelist
Ngemibuzo mayelana nemikhiqizo yethu noma uhlu lwamanani, sicela usishiyele i-imeyili futhi sizokuthinta kungakapheli amahora angama-24.
Chofa UKWENZA UMBUZO
I-3303 Gel Coat Resin Amanzi ukumelana nokugqwala komthelela
IMPAHLA
• I-1102 Gel coat resin inokumelana nesimo sezulu esihle kakhulu, amandla amahle, ubulukhuni nokuqina, ukuncipha okuncane, nokubonakala okuhle komkhiqizo.
ISICELO
•Ilungele ukukhiqizwa kwenqubo yokuhlanganisa ibhulashi, ungqimba lomhlobiso ongaphezulu kanye nongqimba oluvikelayo lwemikhiqizo ye-FRP noma imikhiqizo ye-sanitary ware, ect.
QUALITY INDEX
| ITEM | Ibanga | Iyunithi | Indlela Yokuhlola |
| Ukubukeka | Namathisela uketshezi lwe-viscous olumhlophe | ||
| I-Acidity | 13-20 | mgKOH/g | I-GB/T 2895-2008 |
|
Viscosity, cps 25℃ |
0.8-1.2 |
Pa.s |
I-GB/T7193-2008 |
|
Isikhathi sejeli, amaminithi angu-25 ℃ |
8-18 |
imiz |
I-GB/T7193-2008 |
|
Okuqukethwe okuqinile, % |
55-71 |
% |
I-GB/T7193-2008 |
|
Ukuzinza kwe-thermal, 80℃ |
≥24
|
h |
I-GB/T7193-2008 |
| Inkomba ye Thixotropic, 25°C | 4. 0-6.0 |
|
Amathiphu: Ukuhlola isikhathi sejeli: 25°G okugeza amanzi, engeza u-0.9g T-8M (Newsolar,l%Co) kanye ne-o.9g MOiAta-ljobei) ku-50g resin.
IMPAHLA YOMKHAKHA YOKUSAKAZA
| ITEM | Ibanga |
Iyunithi |
Indlela Yokuhlola |
| Ukuqina kweBarcol | 42 |
| I-GB/T 3854-2005 |
| Ukushisa Ukuphazamisekatumkhathi | 62 | °C | I-GB/T 1634-2004 |
| Ukwandisa ngesikhathi sekhefu | 2.5 | % | I-GB/T 2567-2008 |
| Amandla aqinile | 60 | I-MPa | I-GB/T 2567-2008 |
| I-tensile module | 3100 | I-MPa | I-GB/T 2567-2008 |
| Amandla e-Flexural | 115 | I-MPa | I-GB/T 2567-2008 |
| I-Flexural modulus | 3200 | I-MPa | I-GB/T 2567-2008 |
I-MEMO: Izinga lokusebenza le-resin casting body: Q/320411 BES002-2014
UKUPAKA KANYE NESIGCINI
• Ukupakishwa kwe-gel coat resin: 20 kg inetha, isigubhu sensimbi
QAPHELA
• Lonke ulwazi olukule khathalogi lusekelwe ekuhlolweni okujwayelekile kwe-GB/T8237-2005, ukuze kusetshenziswe inkomba kuphela; mhlawumbe ihluke kudatha yokuhlola yangempela.
• Enqubweni yokukhiqiza yokusebenzisa imikhiqizo ye-resin, ngenxa yokuthi ukusebenza kwemikhiqizo yomsebenzisi kuthintwa izici eziningi, kuyadingeka ukuthi abasebenzisi bazihlole ngaphambi kokukhetha nokusebenzisa imikhiqizo ye-resin.
• Izinhlayiya ze-polyester ezingafakwanga azinzinzi futhi kufanele zigcinwe ngaphansi kuka-25°C emthunzini opholile, zihanjiswe emotweni efrijini noma ebusuku, zingashiyi ilanga.
•Noma isiphi isimo esingafanele sokugcina kanye nokudlulisa kuzodala ukufinyezwa kwesikhathi seshelufu.
UMYALELO
• I-1102 gel coat resin ayinayo i-wax ne-accelerator, futhi iqukethe izithasiselo ze-thixotropic.
• Isikhunta kufanele sicutshungulwe ngendlela evamile ngaphambi kokulungiselela ukuhlangabezana nezidingo zokwakhiwa kwejazi lejeli.
• Izincomo zokunamathisela umbala: ukunamathisela okukhethekile kombala okusebenzayo kwejazi lejeli, 3-5%. Ukuhambisana namandla okufihla okunamathiselwe kombala kufanele kuqinisekiswe ukuhlolwa kwenkambu.
• Uhlelo lokuphulukisa olunconyiwe: i-ejenti yokwelapha ekhethekile ye-gel coat MEKP, 1.A2.5%; i-accelerator ekhethekile yejazi lejeli, i-0.5 ~ 2%, iqinisekiswe ukuhlolwa kwensimu ngesikhathi sokufaka isicelo.
• Umthamo onconyiwe wejazi lejeli: ukujiya kwefilimu emanzi 0. 4-0. 6tmn, umthamo 500~700g/m2, ijazi ijeli lincane kakhulu futhi kulula ukushwabana noma obala, obukhulu kakhulu futhi kulula ukucwilisa
ukuqhekeka noma amabhamuza, ukujiya okungalingani futhi kulula ukukhuphuka Imibimbi noma ukuguquguquka kwengxenye, njll.
• Uma ijeli lejazi lejeli linganamatheli ezandleni zakho, inqubo elandelayo (ungqimba olungaphezulu lokuqinisa) luyenziwa. Kusenesikhathi kakhulu noma sekwephuze kakhulu, kulula ukubangela imibimbi, ukuchayeka kwefayibha, ukushintsha kombala kwendawo noma ukubola, ukukhishwa kwesikhunta, imifantu, imifantu nezinye izinkinga.
• Kunconywa ukukhetha i-2202 gel coat resin yenqubo yokufafaza.
