Uphenyo lwePricelist
Ngemibuzo mayelana nemikhiqizo yethu noma uhlu lwamanani, sicela usishiyele i-imeyili futhi sizokuthinta kungakapheli amahora angama-24.
Chofa UKWENZA UMBUZO
I-Fiberglass Direct Roving E-glass General Injongo
IMPAHLA
I-Fiberglassukuzulazula okuqondileizici:
• Ukusebenza kahle kwenqubo kanye ne-fuzz ephansi.
• Ukuhambisana nezinhlelo eziningi ze-resin.
• Ukumanzisa okuphelele nokushesha.
• Izakhiwo ezinhle zemishini.
• Ukumelana nokugqwala okuhle kwe-asidi.
• Ukumelana nokuguga okuhle kakhulu.
Sinezinhlobo eziningi zeukuzulazula kwe-fiberglass:ukuzulazula kwephaneli,fafaza uzulazula,Ukuzulazula kwe-SMC,ukuzulazula okuqondile,c ukuzulazula kwengilazi, futhiukuzulazula kwe-fiberglass yokuqoba.
IMIHLABA YOBUCHWEPHESHE
| Ukuminyana Komugqa (%) | Okuqukethwe Umswakama (%) | Usayizi Wokuqukethwe (%) | Amandla Okuphuka (N/Tex ) |
| ISO 1889 | ISO 3344 | ISO 1887 | ISO 3375 |
| ± 5 | ≤ 0.10 | 0.50 ± 0.15 | ≥0.40(≤17um)≥0.35(17～24um)≥0.30(≥24um) |
ISICELO
Uhlu olubanzi lwezicelo - lulungele izimo ezahlukahlukene, amathangi e-FRP, imibhoshongo yokupholisa ye-FRP, amaphrofayli emodeli ye-FRP, amashedi amathayela okukhanyisa, izikebhe, izesekeli zezimoto, amaphrojekthi okuvikela imvelo, izinto ezintsha zokwakha uphahla, obhavu, njll.
Eyethuamacansi e-fiberglassziyizinhlobo eziningana:ama-fiberglass surface mats,amacansi e-fiberglass aqoshiwe, futhiamacansi e-fiberglass aqhubekayo. Umata womucu oqotshiweihlukaniswe yaba emulsion futhii-powder glass fiber mats.
ISITOREJI
•Imikhiqizo ye-Fiberglass eqondile yokuzulazula kufanele igcinwe endaweni eyomile, epholile, engenawo umswakama.
•I-Fiberglassukuzulazula okuqondileimikhiqizokufanele igcinwe ephaketheni layo lokuqala ngaphambi kokusetshenziswa. Izinga lokushisa legumbi kanye nomswakama kufanele kugcinwe ku -10 °C ~ 35 °C no ≤ 80%, ngokulandelana.
• Ukuqinisekisa ukuphepha nokugwema ukulimaza umkhiqizo, ukuphakama kwesitaki samaphalethi akufanele kudlule izingqimba ezintathu.
• Uma ama-pallet enqwabelene abe yizingqimba ezi-2 noma ezi-3, kufanele kuqashelwe ngokukhethekile ukuhambisa ithreyi eliphezulu ngendlela efanele nangokushelela.
UKUKHOMBA
| Uhlobo Lwengilazi | E6 | ||||||
| Uhlobo Losayizi | Silane | ||||||
| Ikhodi Yosayizi | 386H | ||||||
| Ukuminyana Komugqa (tex) | 300 | 600 | 1200 | 2200 | 2400 | 4800 | 9600 |
| I-Filament Diameter (μm) | 13 | 17 | 17 | 23 | 17/24 | 24 | 31 |
IZIMPAHLA ZEMITHETHO
| Izakhiwo Zemishini | Iyunithi | Inani | I-Resin | Indlela |
| Amandla Okuqina | I-MPa | 2765 | UP | I-ASTM D2343 |
| I-Tensile Modulus | I-MPa | 81759 | UP | I-ASTM D2343 |
| Amandla okugunda | I-MPa | 2682 | EP | I-ASTM D2343 |
| I-Tensile Modulus | I-MPa | 81473 | EP | I-ASTM D2343 |
| Amandla okugunda | I-MPa | 70 | EP | I-ASTM D2344 |
| Ukugcinwa kwamandla e-Shear (amahora angama-72 abilayo) | % | 94 | EP | / |
Imemo: Idatha engenhla ingamanani angempela okuhlola e-E6DR24-2400-386H futhi ngereferensi kuphela.
UKUPAKA
| Ubude bephakheji mm (in) | 260 (10.2) | 260 (10.2) |
| Iphakheji ngaphakathi kobubanzi mm (ku) | 160 (6.3) | 160 (6.3) |
| Iphakheji ngaphandle kobubanzi mm (ku) | 275 (10.6) | 310 (12.2) |
| Isisindo sephakheji kg (lb) | 15.6 (34.4) | 22 (48.5) |
| Inombolo yezendlalelo | 3 | 4 | 3 | 4 |
| Inombolo yama-doffs isendlalelo ngasinye | 16 | 12 | ||
| Inombolo yama-doffs ngephalethi ngayinye | 48 | 64 | 36 | 48 |
| Isisindo sengqikithi nge-pallet kg (lb) | 750 (1653.5) | 1000 (2204.6) | 792 (1746.1) | 1056 (2328.1) |
| I-Fiberglassukuzulazula okuqondile Ubude bephalethi mm (in) | 1120 (44.1) | 1270 (50.0) | ||
| I-Fiberglassukuzulazula okuqondile Ububanzi bephalethi mm (in) | 1120 (44.1) | 960 (37.8) | ||
| I-Fiberglassukuzulazula okuqondile Ubude bephalethi mm (in) | 940 (37.0) | 1200 (47.2) | 940 (37.0) | 1200 (47.2) |
ISITOREJI
• Ngaphandle uma kuchazwe ngenye indlela, iI-Fiberglassukuzulazula okuqondilekufanele igcinwe endaweni eyomile, epholile futhi engenawo umswakama.
• Imikhiqizo ye-fiberglass kufanele ihlale ephaketheni layo langempela kuze kube ngaphambi kokusetshenziswa. Izinga lokushisa legumbi kanye nomswakama kufanele ngaso sonke isikhathi kugcinwe ku -10℃~35℃ kanye ≤80% ngokulandelanayo.
• Ukuqinisekisa ukuphepha nokugwema ukulimala komkhiqizo, ama-pallet akufanele apakishwe ngaphezu kwezingqimba ezintathu ukuphakama.
• Uma ama-pallets ehlanganiswe ezingqimbeni ezi-2 noma ezi-3, ukunakekelwa okukhethekile kufanele kuthathwe ngendlela efanele futhi ngokushelelayo ukuhambisa i-pallet ephezulu.
