Uphenyo lwe-Pricelist
Uma unemibuzo mayelana nemikhiqizo yethu noma uhlu lwamanani, sicela usishiyele i-imeyili yakho futhi sizoxhumana nathi zingakapheli amahora angama-24.
Chofoza ukuze uthumele umbuzo
I-HCM-1 Vinyl Ester Glass Flake Mortar
IMPAHLA
• Inesithiyo esiyingqayizivele sokulwa nokugqwala, ukumelana okuqinile nokugqwala, kanye nokugqwala okuphansi kwegesi.
•Ukumelana okuhle namanzi, i-asidi, i-alkali kanye nezinye izinto ezikhethekile zamakhemikhali, kanye nokumelana okuvelele nezindlela zokuxazulula izinkinga.
• Ukuqina okuncane, ukunamathela okuqinile ezisekelweni ezahlukene, kanye nokulungiswa okulula kwengxenye.
• Ukuqina okuphezulu, izakhiwo ezinhle zemishini, ukuzivumelanisa nokushintsha kwezinga lokushisa okungazelelwe.
•Ukwelashwa okuxhumene ngo-100%, ubulukhuni obuphezulu bendawo, ukumelana okuhle nokugqwala.
• Izinga lokushisa eliphezulu lokusebenza elinconywayo: 140°C esimweni sokumanzi kanye no-180°C esimweni esomile.
ISICELO
• Ukufakwa kwezakhiwo zensimbi kanye nezakhiwo zekhonkrithi (izakhiwo) ngaphansi kwezimo zemvelo ezinzima njengezitshalo zikagesi, izincibilikisi, kanye nezitshalo zomanyolo.
• Ukuvikelwa kwezindawo zangaphakathi nezangaphandle zemishini, amapayipi, kanye namathangi okugcina izinto ezinoketshezi olungaphansi kwamandla okugqwala aphakathi nendawo.
• Isebenza kahle kakhulu uma isetshenziswa kanye nepulasitiki eqiniswe ngefayibha yengilazi (i-FRP), njenge-impeller yensimbi esheshayo.
• Indawo ezungezile ene-asidi ye-sulfuric kanye nemishini efana nezindawo zikagesi, izincibilikisi, kanye nezindawo zokufaka umanyolo.
• Imishini yasolwandle, indawo enzima enokwehluka kokugqwala kwegesi, uketshezi kanye nezigaba ezintathu eziqinile.
IKHWALITHI ELIYINHLOBO
Qaphela: I-HCM‐1 Vinyl Ester Glass Flake Mortar ihlangabezana nezidingo ze-HG/T 3797‐2005.
| Into | I-HCM-1D (Ijazi eliyisisekelo) | I-HCM-1 (Udaka) | I-HCM-1M (Ijazi lobuso) | I-HCM-1NM (Ijazi elivimbela ukugqokwa) | |
| Ukubukeka | onsomi /obomvu | umbala wemvelo/ompunga | Mpunga/luhlaza okotshani | Mpunga/luhlaza okotshani | |
| isilinganiso, g/cm3 | 1.05~1.15 | 1.3~1.4 | 1.2~1.3 | 1.2~1.3 | |
| Isikhathi sejeli ye-G (I-1965)25℃） | indawo eyomile, h | ≤1 | ≤2 | ≤1 | ≤1 |
| Komile ngempela，h | ≤12 | ≤24 | ≤24 | ≤24 | |
| Isikhathi sokufaka kabusha，h | 24 | 24 | 24 | 24 | |
| ukuzinza kokushisa，h（80℃） | ≥24 | ≥24 | ≥24 | ≥24 | |
IMPAHLA YOMKHANIKI YE-CASTING
| Into | I-HCM-1D(I-1965)Ijazi eliyisisekelo） | I-HCM-1(I-1965)Udaka） | I-HCM-1M(I-1965)Ijazi elingaphezulu） | I-HCM-1NM(I-1965)Ijazi elivimbela ukugqokwa） |
| Amandla okudonsa，MPa | ≥60 | ≥30 | ≥55 | ≥55 |
| Amandla Okugobeka，MPa | ≥100 | ≥55 | ≥90 | ≥90 |
| Aukunamathela,I-MPa | ≥8(I-1965)ipuleti lensimbi） ≥3(I-1965)ukhonkolo） | |||
| Wukumelana nendlebe，mg | ≤100 | ≤30 | ||
| Hukumelana nokudla | umjikelezo izikhathi ezingu-40 | |||
IMEMO: Idatha iyizakhiwo ezivamile zomzimba ze-resin castings ezivuthwe ngokuphelele futhi akufanele ibhekwe njengemininingwane yomkhiqizo.
Ipharamitha Yobuchwepheshe
| A Iqembu | B Iqembu | Mukunamathela |
| I-HCM‐1D(I-1965)Ijazi eliyisisekelo） | I-ejenti yokwelapha | 100: ()1~3） |
| I-HCM‐1(I-1965)Udaka） | 100: ()1~3） | |
| I-HCM‐1M(I-1965)Ijazi elingaphezulu） | 100: ()1~3） | |
| I-HCM‐1NM(I-1965)Ijazi elivimbela ukugqokwa） | 100: ()1~3） |
IMEMO: Umthamo wengxenye ye-B ungalungiswa ngesilinganiso esingenhla ngokuya ngezimo zemvelo
UKUPAKISHA NOKUGCINA
• Lo mkhiqizo upakishwe esitsheni esihlanzekile, esomile, Isisindo esiphelele: Ingxenye engu-20Kg/umgqomo, ingxenye engu-B engu-25Kg/umgqomo (Ukwakhiwa kwangempela kusekelwe esilinganisweni esingu-A:B=100: (1~3) sokulungiselela izinto zokwakha, futhi kungalungiswa ngokufanele ngokwezimo zemvelo zokwakha)
• Indawo yokugcina kufanele ipholile, yome, futhi ingeniswe umoya. Kufanele ivikelwe elangeni eliqondile futhi ihlukaniswe nomlilo. Isikhathi sokugcina esingaphansi kwama-25°C siyizinyanga ezimbili. Izimo zokugcina ezingafanele noma zokuhamba zizofinyeza isikhathi sokugcina.
• Izidingo zokuhamba: kusukela ngoMeyi kuya ekupheleni kuka-Okthoba, kunconywa ukuthi kuthuthwe ngamaloli aqandisiwe. Ukuthutha okungenamibandela kufanele kwenziwe ebusuku ukuze kugwenywe amahora okukhanya kwelanga.
QAPHELA
• Xhumana nenkampani yethu ukuze uthole izindlela nezinqubo zokwakha.
• Indawo yokwakha kufanele igcine ukujikeleza komoya nezwe langaphandle. Uma wakha endaweni engenawo umoya, sicela uthathe izinyathelo zokungenisa umoya ngenkani.
• Ngaphambi kokuba ifilimu yokumboza yome ngokuphelele, gwema ukungqubuzana, ukushayisana kanye nokungcoliswa yimvula noma olunye uketshezi.
• Lo mkhiqizo ulungisiwe waba yi-viscosity efanele ngaphambi kokushiya ifektri, futhi akukho mshini omncane okufanele wengezwe ngokunganaki. Sicela uxhumane nenkampani yethu uma kudingeka.
• Ngenxa yezinguquko ezinkulu ekwakhiweni kokumboza, indawo yokusetshenziswa kanye nezici zokuklama ukumboza, futhi asikwazi ukuqonda nokulawula ukuziphatha kokwakhiwa kwabasebenzisi, umthwalo wemfanelo wenkampani yethu unqunyelwe ekhwalithini yomkhiqizo wokumboza uqobo. umsebenzisi unesibopho sokusebenza komkhiqizo endaweni ethile yokusetshenziswa.
